The wheeled hay raker is mounted on the four wheel tractor, the material of tine is 65Mn spring steel to keep durable. This machine has simple structure, convenient to operate and reliable operating system, less failure rate and high efficiency. Operation, quality, and maintenance are simple, dynamic performance is good. Both hay raker could be used together with our lawn mower, it can rake the three evenly grass swath which is helpful for the subsequent bundling work.
1. Suitable for three-point suspension device suspended on the tractor. The fingerboard of the machine passes behind the fingerboard until the ventilation is loose.
2. Change the angle of the finger to adjust the width of the grass
3. Hold the teeth for long spring steel teeth
4. Adjust the ground pressure by stretching the adjustment plate.
5. Transfer your fingers to the rear of the tractor during transportation
6. You can either scribble or turn to the sun.
Collecting width of grass
Diameter of tine plate
No.s of tine